NEWS

Food-Grade Silicone Explained: FDA, LFGB and EU Requirements

November 18, 2026

"Food-grade" is a claim, not a standard

No single certificate is called "food-grade". The phrase describes a material that has been tested against the food-contact rules of the market where it will be sold — and those rules differ by country. A silicone spatula sold in Germany, in the United States and in Japan is judged by three different legal frameworks, using three different test protocols.

That matters for buyers, because a supplier who says "our silicone is food-grade" has told you nothing you can verify. The useful question is narrower: which market, which regulation, which test report, issued by which laboratory.

This article summarises how the three main markets work, what the laboratory tests actually measure, and which documents to request before placing an order.

This is general information for buyers, not legal advice. Regulations change; confirm current requirements with your importer or a testing laboratory.

European Union: a framework, not a silicone rule

Food-contact materials in the EU are governed by Regulation (EC) No 1935/2004. It sets the general principles: materials must not transfer constituents to food in quantities that endanger health, change the composition of the food, or deteriorate its taste and odour. Regulation (EC) No 2023/2006 adds good manufacturing practice.

What surprises many buyers is that the EU has no harmonised specific measure for silicone. The plastics regulation, Regulation (EU) No 10/2011, explicitly does not cover silicone elastomers. In practice, silicone is regulated at member-state level, and two national frameworks dominate because they are the ones laboratories test against:

  • Germany — LFGB and BfR Recommendation XV
  • France — the Arrêté du 25 novembre 1992 on elastomers

A product tested to the German framework is generally accepted across the EU, which is why "LFGB" appears on so many European test reports even for goods that never enter Germany.

Germany: LFGB §30/31 and BfR Recommendation XV

The Lebensmittel- und Futtermittelgesetzbuch (LFGB) is the German food and feed code. Two paragraphs matter here: §30 prohibits materials that could harm health, and §31 prohibits transfer of constituents that would change food in an unacceptable way.

The technical detail sits in BfR Recommendation XV, "Silicone", issued by the German Federal Institute for Risk Assessment. It defines which silicone grades may be used, and sets limits — including volatile organic content and a maximum permissible peroxide value — that a laboratory verifies on a sample of the finished article.

One frequent misunderstanding: an "LFGB certificate" is a laboratory test report, not a government licence. There is no authority that certifies a factory as LFGB-compliant. The report is issued by an accredited lab for a specific product, formulation and test date.

United States: FDA 21 CFR 177.2600

In the US, silicone rubber for repeated food contact falls under Title 21 of the Code of Federal Regulations, section 177.2600 — "Rubber articles intended for repeated use." It lists permitted base polymers and limits on extractables after repeated exposure to water and to hexane, simulating repeated use and fatty foods.

As in Europe, the FDA does not approve or certify individual products. There is no "FDA approval" number for a spatula. Compliance is the manufacturer's declaration that the formulation meets the section, supported by extraction testing. Any supplier advertising "FDA approved silicone" is using the word loosely.

What the laboratory actually tests

Across all three frameworks, the tests look similar in structure:

Overall migration. The sample is exposed to food simulants — water, acetic acid, ethanol, olive oil or iso-octane, chosen to imitate the food it will touch — and the total mass transferred is measured. Limits are expressed in milligrams per square decimetre of contact surface.

Specific migration. Where a substance has its own limit, the laboratory measures that substance directly rather than the total.

Sensory testing. Trained assessors check whether the material transfers taste or odour. This catches problems chemistry alone misses, and it is where poorly cured silicone fails.

Volatile organic content and peroxide value. Specific to silicone under BfR XV. High values indicate incomplete curing — the material may still be releasing by-products.

Documents to request from a supplier

Before ordering, ask for a document set rather than a claim:

  • Food-contact test report naming the exact regulation (LFGB §30/31 with BfR XV, FDA 21 CFR 177.2600, or the destination market's equivalent)
  • The laboratory's name and accreditation number — an unaccredited report is not evidence
  • The report's date and the product it covers — a report for one mould does not cover another with a different formulation or colour
  • A declaration of compliance (DoC) listing the substances used and the migration limits applied
  • Colourant and additive documentation — pigments must themselves be food-contact approved
  • Batch traceability — how the factory links a finished carton back to a material lot

If a supplier cannot produce items 1 to 4, the claim "food-grade" is unsupported, whatever the website says.

Claims that carry little weight

"BPA-free." Silicone does not contain bisphenol A. The claim is true and meaningless.

"FDA approved." The FDA approves substances and food additives, not finished kitchen products. The correct statement is "compliant with 21 CFR 177.2600".

"100% platinum-cured." Describes the curing chemistry, which is a genuine quality marker, but says nothing about whether the finished article passed migration testing.

"SGS certified." SGS is a laboratory, not a standard. Ask which test and which regulation.

Questions buyers ask us

Does silicone release anything at high temperature? Food-contact silicone is typically rated to about 230 °C. Above that, the material degrades; the migration tests are run at the temperatures specified by the regulation, not at arbitrary extremes.

Is coloured silicone safe? Only if the pigment is food-contact approved and covered by the test report. Colour is a common gap: the base material is tested, the pigment is not.

How often should reports be renewed? When the formulation, the supplier of the raw material, or the regulation changes. Many buyers require renewal every 12–24 months.

Can one report cover several products? Only products sharing the same formulation and colour. Different shapes from the same material lot may share a report; a different pigment needs its own.

Yongli manufactures silicone kitchenware in Huizhou, China, for brands and distributors. If you need the food-contact documentation package for a specific product, request it with the product code and destination market and we will confirm what is available.

Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
tea infuser Silicone Tea Strainers customizable

Send your inquiry

Attachment:
    Choose a different language
    ╳
    English
    Türkçe
    русский
    Português
    한국어
    Español
    Current language:English